Features
The lift-type SE10A mows a 118" swath and is available as a 540 or 1000 RPM unit. The lift-type features a rugged CAT II-III Q.H. for easier unit “hook-up.” The lift-type can be operated on 55 HP (min.) tractors (with adequate front weights). The side skirts are 9-1/2" deep to help handle large volumes of material and along with the 10 gauge deck are reinforced to provide troublefree performance.
The pull-type SE10A requires only a 45 HP (min.) tractor for economical, wide-cut mowing. A hydraulic cylinder or ratchet lift screw is available for raising and lowering the mower. A spring shock absorber is optional to help cushion shock-loads to the mainframe when operating in rough terrain. (Unit shown with optional chain guards. Deflectors are standard.)
- Cross-braced pan blade carriers
- Quick hitch compatible
- Close-coupled design
- Torque dampeners on side drive-lines
Specs
| Model | SE10A |
| Cutting Width | 118'' |
| Overall Width | 124 3/8'' |
| Overall Length | 116'' |
| Cutting Height (Min) | 1 1/4''-12'' |
| Height Adjustment | Ratchet Jack - Lift Cylinder - Pull, Semi-Mt |
| Jack Stand | Std - Pull |
| Hitch | CAT 2 & 3 QH - Lift Semi-Mount, Pull |
| Blade Carrier | Pan |
| Blades | .401'' x 3'' Updraft |
| Blade Overlap | 4'' |
| HP Required | 55 Lift |
| 45 Pull | |
| Gearbox Rating - Center | 100 HP |
| Gearbox Rating - Outboard | 70 HP |
| Gearbox Oil (85W-140) | Factory Filled |
| Output Shaft Diameter | 2'' |
| Blade tip Speed (FPM) | 15,339 |
| Cutting Capacity | 1'' |
| Driveline Size | CAT 4 |
| Driveline Protection | Slip Clutch |
| Deck Thickness | 10 Ga. |
| Side Skirt | 10 Ga. X 9 1/2'' |
| Tire and Wheel | See Note |
| Safety Tow Chain | Std - Pull |
Copyright © 2022 - All Rights Reserved - EquipmentLocator.com