SALINAS WEATHER

» Click Here To See Future Forecast

Specializing in farm equipment sales, parts, and service.

Kongskilde VM-1 S

Double tap to zoom

 

Features

  • Steerable axles
    Axles with articulation (steerable) are available for the big 2-auger and all 3-auger mixers.
    - Less wear on tires and surface.
    - Reduces the load on the chassis.
  • Closed technical compartment for electronic and hydraulic components
    - Prevents damage to components
    - Trouble shooting is easier
    - Protection against feed remains, dirt from tractor wheels, wind and weather etc.
  • Easy access to technical compartment
    - Minimum time is used for inspection,troubleshooting and maintenance of battery.
  • Strong ladder and platform
    On VM-1 S, VM-1, VM-2S and VM-3 S the ladder can subsequently be moved to the right-hand side.
    - Possibility of inspection of the mixture and high safety.
    - Easy access
  • Separate chassis
    The drawing power goes through the drawbar and the chassis frame to the rear axle. The tub stands on the chassis via the weighing cells.
    - No twisting or horizontal draw in the weighing cells
    - The weighing system can work when the tractor is disconnected and the mixer stands on the support.
  • Oversteering of valve block
    - In case of electronic failure, the hydraulic valve block can be oversteered manually directly on the valve.
  • Straight dive lines
    Drive lines without deviation of the PTO shafts.
    - Long greasing intervals
    - Minimum maintenance.
  • Strong auger gears
    Strong auger bearing consisting of 2 large conical roller bearings. When it is cold, the oil level falls. Therefore the upper bearing is greased for life and the lower bearing runs in oil bath.
    - Maximum support
    - Minimum friction and maintenance.
  • Tapered tub sides
    The tapered tub sides hold the feed firmly.
    - Prevents the feed from rotating with the auger.
    - Instead the auger mixes the feed quickly and effectively.
  • Adjustable shearbars
    The 2 adjustable shearbars are very effective and optimise the shredding of bales of hay and straw.
    - Quick shredding of bales
    - Shorter operation time means less wear and less power consumption.
  • One shear bolt
    One shear bolt for all augers. All augers are stopped when the shear bolt releases.
    - The other auger gears are not overloaded by the additional forces.
    - The augers remain synchronized.
  • Spring-loaded axles
    All mixers with 2 or 3 axles have spring suspended axles. Less wear on tires, rim and chassis because the individual wheel is not exposed to the entire load, contrary to fixed axles.

Specifications

Null

  • brand NHAG
  • brand NHCE
  • brand CTbugvac
  • brand airOfan
  • brand APT
  • brand AIE
  • brand berthoud
  • brand braud
  • brand brillion
  • brand bushhog
  • brand BWimp
  • brand calag
  • brand clemens
  • brand cropcare
  • brand DMmfg
  • brand deutz
  • brand domries
  • brand exmark
  • brand flory
  • brand gearmore
  • brand gp
  • brand hustler
  • brand kawasaki
  • brand kongskilde
  • brand kuhn
  • brand loftness
  • brand maschio
  • brand MC
  • brand micron
  • brand pequea
  • brand PES
  • brand rhino
  • brand shaver
  • brand skidpro
  • brand solex
  • brand unverferth
  • brand wasco
  • brand woods
  • brand worksaver
  • brand vrisimo